There are two types of generator systems that SeaTown Electric installs. The first is a standby home generator. This will keep your power on during an outage. It’s installed outside your house (like an AC unit) and comes on automatically whether you’re home or away. All within seconds of a power outage. Plus home generators run on propane or natural gas so there’s no refueling.
So how does it work? Its simple. Your automatic transfer switch (ATS) monitors the electricity coming from the utility. It's working 24/7 to protect your home. This device can be located exterior or interior. When the power fails or incoming voltage drops to brown out levels the ATS recognizes the power failure and prompts the generator to turn on. This system is designed for the consumer who does not want the hassle of wheeling out a portable generator, refueling it and maintaining it throughout the seasons. The Kohler generator is preferred by SeaTown Electric for various reasons, warrantee, consumer reports, and quality. It also has capability of remote monitoring through a very simple to use app. This generator runs automatic and flawless.
The second option for power restoration is the portable option. This system is 100% manual. When the power goes out you would wheel out your portable generator, plug it in, activate your interlock kit, start the generator and choose the circuits you want to turn on. When choosing the size of a generator, we recommend a 5,000-10,000 watt (or 5kw-10kw) for portable generators. If it is a standby automatic system we recommend 14,000-20,000 watt (or 14kw-20kw). You can purchase both option directly through SeaTown Electric www.seatownelectric.com SeaTown electric is your go to Seattle Electrical Contractor
Showing posts with label zinsco panel. Show all posts
Showing posts with label zinsco panel. Show all posts
Wednesday, June 1, 2016
Saturday, May 28, 2016
Seattle Electrician adding outlets.
At Seatown Electric we handle all aspects of home wiring. We specialize in Whole Home Rewiring, The Seattle area is filled with Knob and Tube wiring. Our goal is to eliminate as much as possible. Seattle Electricians must be well trained in Knob and Tube wiring since there is so much of it in Seattle. A small job like adding aditional outlets might require Knob and Tube rewiring.
Our electrical codes have changed drastically in 2008-2016. If we add outlets, or even replace outlets we are required to install some sort of AFCI protection. AFCI protection stands for Arc Fault Circuit Interupter. This device is designed to protect the home from low current arcing. You can either install AFCI protection at the panel box, or replace the device (outlet) with an AFCI protected outlet, they look similar to GFCI outlets.
Since AFCI protection is required and they are designed to find faults they tend to find faults when they are hooked up to Knob and Tube. This is why it sometimes makes sense to just get rid of the Knob and Tube.
Knob and Tube wiring is rumored to be "safe" if it has not been tampered with. I find this statement to be false. Knob and tube is designed for eary 1900 era equiptment. Take a step back into time and imagine what that looked like, a small table lamp or two, 1-2 outlets per room for small radios. This wiring was not designed for compact wall heaters, curling irons, 3-4 wall TV's per home, toaster, surround sound, computers etc... Not to mention all of that new age equiptment has no ground protection with Knob and Tube wiring.
If you have Knob and Tube it should be replaced, SeaTown Electric, you're Seattle Electricians can help replace this old wiring. (206)-293-0037
www.seatownelectric.com
Our electrical codes have changed drastically in 2008-2016. If we add outlets, or even replace outlets we are required to install some sort of AFCI protection. AFCI protection stands for Arc Fault Circuit Interupter. This device is designed to protect the home from low current arcing. You can either install AFCI protection at the panel box, or replace the device (outlet) with an AFCI protected outlet, they look similar to GFCI outlets.
Since AFCI protection is required and they are designed to find faults they tend to find faults when they are hooked up to Knob and Tube. This is why it sometimes makes sense to just get rid of the Knob and Tube.
Knob and Tube wiring is rumored to be "safe" if it has not been tampered with. I find this statement to be false. Knob and tube is designed for eary 1900 era equiptment. Take a step back into time and imagine what that looked like, a small table lamp or two, 1-2 outlets per room for small radios. This wiring was not designed for compact wall heaters, curling irons, 3-4 wall TV's per home, toaster, surround sound, computers etc... Not to mention all of that new age equiptment has no ground protection with Knob and Tube wiring.
If you have Knob and Tube it should be replaced, SeaTown Electric, you're Seattle Electricians can help replace this old wiring. (206)-293-0037
www.seatownelectric.com
Thursday, March 19, 2015
Electrical Panels Change Out Seattle Washington
Electrical panels are one of the more frequent jobs for Seatown Electric Home owners all across Washington State are in need of a new electrical panel, and don't even know it. We are going to try and cover all of the problematic panels and the process for removing them in this post.
Lets start by explaining what the Electrical Panel is, The "Grey box" usually located in a garage space or basement. Some call it the Fuse box, Switch box, or Breaker box. This "Grey box" is the source, or heart of the homes electrical service. Typically one of these panels controls the whole house, But in some cases there is an auxiliary panel or "sub panel".
So how do you know if your electrical panel is outdated? The best way, is to get a free estimate from SeaTown Electric . But if you just want to have a look for yourself here are the Electrical code requirements for Seattle Washington:
Grounding and bonding must be installed, Two eight foot grounding electrodes are required and must be connected with copper wire (wire size depends on the service size). One main water pipe bond must be install within 5 feet of where it enters the house, all metal waste pipes, plumbing and gas pipes must be bonded. Electrical panels must have a main breaker either at the electrical panel, or you might find it at the meter. There is also Height, and space requirements per NEC code.
Some of the problematic panels are Zinsco, Federal Pacific, and old screw in type fuses.
Federal Pacific Panels , Zinsco Panels and fuse panels should be replaced if they are still in your home. The breakers fail to trip when under heavy load causing fires. Seatown Electric can take out the old electrical panel and replace it with a new panel in a days worth of work. our electricians specialize in Electrical panel replacement and Knob and Tube replacement in the greater Seattle Area.
to scheddule a free estimate please call (206)-293-0037 or visit Our Website
Lets start by explaining what the Electrical Panel is, The "Grey box" usually located in a garage space or basement. Some call it the Fuse box, Switch box, or Breaker box. This "Grey box" is the source, or heart of the homes electrical service. Typically one of these panels controls the whole house, But in some cases there is an auxiliary panel or "sub panel".
So how do you know if your electrical panel is outdated? The best way, is to get a free estimate from SeaTown Electric . But if you just want to have a look for yourself here are the Electrical code requirements for Seattle Washington:
Grounding and bonding must be installed, Two eight foot grounding electrodes are required and must be connected with copper wire (wire size depends on the service size). One main water pipe bond must be install within 5 feet of where it enters the house, all metal waste pipes, plumbing and gas pipes must be bonded. Electrical panels must have a main breaker either at the electrical panel, or you might find it at the meter. There is also Height, and space requirements per NEC code.
Some of the problematic panels are Zinsco, Federal Pacific, and old screw in type fuses.
Federal Pacific Panels , Zinsco Panels and fuse panels should be replaced if they are still in your home. The breakers fail to trip when under heavy load causing fires. Seatown Electric can take out the old electrical panel and replace it with a new panel in a days worth of work. our electricians specialize in Electrical panel replacement and Knob and Tube replacement in the greater Seattle Area.
to scheddule a free estimate please call (206)-293-0037 or visit Our Website
Tuesday, March 17, 2015
AFCI Breakers And GFCI Protection Seattle Washington
What Does an AFCI or Arc-Fault Circuit Interrupter do? Arc-Faults are designed to help prevent fires by detecting an unintended electrical arc and disconnecting the power before the arc starts a fire. Unlike GFCI devices that prevent electrical shock, AFCI breakers only detect Arc-Faults. Same goes with a standard breaker, A standard breaker only detects circuit overloads and short circuits. And the AFCI again, only detects Arc-Faults.
Arc-Faults have created a whole new challenge for Electrical Contractors and home owners in Washington State. An example, is a typical circuit extension will now require Arc-Fault protection. If the electrical panel cannot fit the required space of an Arc-Fault protection, the homeowner might be faced with having to get a sub panel, or a full panel change out, just to bring one circuit up to code.
In dwelling units, all 15-20 Amp 120 volt circuits supplying outlets or devices are required in kitchens, family rooms, dining rooms, living rooms, closets, hallways, laundry areas, or any other areas described in article 210.12 (A)(1) through 6. of the NEC code.
A quick rule of thumb for AFCI protection requirements, and GFCI requirements is: if you are adding or altering a circuit in a residential dwelling you are most likely going to have to GFCI protect it: bathrooms, exterior, exposed basements, garage, kitchens, wet bars, and any wet locations. Or AFCI protect it: Kitchens, family rooms, dining rooms, living rooms, closets, hallways, laundry areas. GFCI outlets protect from electrical shock, AFCI breakers protect from Arc-Faults.
For a whole home safety check please visit: SeaTown Electric or call: (206)-293-0037
Arc-Faults have created a whole new challenge for Electrical Contractors and home owners in Washington State. An example, is a typical circuit extension will now require Arc-Fault protection. If the electrical panel cannot fit the required space of an Arc-Fault protection, the homeowner might be faced with having to get a sub panel, or a full panel change out, just to bring one circuit up to code.
In dwelling units, all 15-20 Amp 120 volt circuits supplying outlets or devices are required in kitchens, family rooms, dining rooms, living rooms, closets, hallways, laundry areas, or any other areas described in article 210.12 (A)(1) through 6. of the NEC code.
A quick rule of thumb for AFCI protection requirements, and GFCI requirements is: if you are adding or altering a circuit in a residential dwelling you are most likely going to have to GFCI protect it: bathrooms, exterior, exposed basements, garage, kitchens, wet bars, and any wet locations. Or AFCI protect it: Kitchens, family rooms, dining rooms, living rooms, closets, hallways, laundry areas. GFCI outlets protect from electrical shock, AFCI breakers protect from Arc-Faults.
For a whole home safety check please visit: SeaTown Electric or call: (206)-293-0037
Wednesday, February 25, 2015
Is My Electrical Panel Safe?
Our answer is always the same. What year was the house built? And, have you ever had it inspected? If it has been 5-10 years, and you have no record of any inspections, you owe it to yourself and family, to have it looked at.
Along with inspections, to assure your safety, there are also websites available to help rule out problem panels. www.ismypanelsafe.com is a a very helpful recource, to help determine if your panel is one of the worst out there. In the electrical industry, there are three panels that every electrical contractor will agree are the worst: Zinsco panels, Federal Pacific panels, and of course, Fuse panels. All of which, have been recalled due to extreme fire hazards.
Electrical panels are the heart of your electrical system, and a lot of the time, are overlooked as being a simple "grey box". In reality, the panel is the source that ties in all of the components, that make your system safe. If you constantly trip breakers, and your panel is older than 20 years, you need to start thinking about upgrades.
To request a FREE quote, visit us at www.SeaTownElectric.com
Subscribe to:
Posts (Atom)



