Showing posts with label AFCI protection. Show all posts
Showing posts with label AFCI protection. Show all posts

Thursday, March 19, 2015

Electrical Panels Change Out Seattle Washington

Electrical panels are one of the more frequent jobs for Seatown Electric Home owners all across Washington State are in need of a new electrical panel, and don't even know it. We are going to try and cover all of the problematic panels and the process for removing them in this post. 





Lets start by explaining what the Electrical Panel  is, The "Grey box" usually located in a garage space or basement. Some call it the Fuse box, Switch box, or Breaker box. This "Grey box" is the source, or heart of the homes electrical service. Typically one of these panels controls the whole house, But in some cases there is an auxiliary panel or "sub panel". 

So how do you know if your electrical panel is outdated? The best way, is to get a free estimate from SeaTown Electric . But if you just want to have a look for yourself here are the Electrical code requirements for Seattle Washington:

Grounding and bonding must be installed, Two eight foot grounding electrodes are required and must be connected with copper wire (wire size depends on the service size). One main water pipe bond must be install within 5 feet of where it enters the house, all metal waste pipes, plumbing and gas pipes must be bonded. Electrical panels must have a main breaker either at the electrical panel, or you might find it at the meter. There is also Height, and space requirements per NEC code.

Some of the problematic panels are Zinsco, Federal Pacific, and old screw in type fuses. 
Federal Pacific Panels , Zinsco Panels and fuse panels should be replaced if they are still in your home. The breakers fail to trip when under heavy load causing fires. Seatown Electric can take out the old electrical panel and replace it with a new panel in a days worth of work. our electricians specialize in Electrical panel replacement and Knob and Tube replacement in the greater Seattle Area.

to scheddule a free estimate please call (206)-293-0037 or visit Our Website

Tuesday, March 17, 2015

AFCI Breakers And GFCI Protection Seattle Washington

What Does an AFCI or Arc-Fault Circuit Interrupter do? Arc-Faults are designed to help prevent fires by detecting an unintended electrical arc and disconnecting the power before the arc starts a fire. Unlike GFCI devices that prevent electrical shock, AFCI breakers only detect Arc-Faults. Same goes with a standard breaker, A standard breaker only detects circuit overloads and short circuits. And the AFCI again, only detects Arc-Faults. 


Arc-Faults have created a whole new challenge for Electrical Contractors and home owners in Washington State. An example, is a typical circuit extension will now require Arc-Fault protection. If the electrical panel cannot fit the required space of an Arc-Fault protection, the homeowner might be faced with having to get a sub panel, or a full panel change out, just to bring one circuit up to code.

In dwelling units, all 15-20 Amp 120 volt circuits supplying outlets or devices are required in   kitchens, family rooms, dining rooms, living rooms, closets, hallways, laundry areas, or any other areas described in article 210.12 (A)(1) through 6. of the NEC code.

A quick rule of thumb for AFCI protection requirements, and GFCI requirements is: if you are adding or altering a circuit in a residential dwelling you are most likely going to have to GFCI protect it: bathrooms, exterior, exposed basements, garage, kitchens, wet bars, and  any wet locations. Or  AFCI protect it: Kitchens, family rooms, dining rooms, living rooms, closets, hallways, laundry areas. GFCI outlets protect from electrical shock, AFCI breakers protect from Arc-Faults. 

For a whole home safety check please visit: SeaTown Electric or call: (206)-293-0037