There are two types of generator systems that SeaTown Electric installs. The first is a standby home generator. This will keep your power on during an outage. It’s installed outside your house (like an AC unit) and comes on automatically whether you’re home or away. All within seconds of a power outage. Plus home generators run on propane or natural gas so there’s no refueling.
So how does it work? Its simple. Your automatic transfer switch (ATS) monitors the electricity coming from the utility. It's working 24/7 to protect your home. This device can be located exterior or interior. When the power fails or incoming voltage drops to brown out levels the ATS recognizes the power failure and prompts the generator to turn on. This system is designed for the consumer who does not want the hassle of wheeling out a portable generator, refueling it and maintaining it throughout the seasons. The Kohler generator is preferred by SeaTown Electric for various reasons, warrantee, consumer reports, and quality. It also has capability of remote monitoring through a very simple to use app. This generator runs automatic and flawless.
The second option for power restoration is the portable option. This system is 100% manual. When the power goes out you would wheel out your portable generator, plug it in, activate your interlock kit, start the generator and choose the circuits you want to turn on. When choosing the size of a generator, we recommend a 5,000-10,000 watt (or 5kw-10kw) for portable generators. If it is a standby automatic system we recommend 14,000-20,000 watt (or 14kw-20kw). You can purchase both option directly through SeaTown Electric www.seatownelectric.com SeaTown electric is your go to Seattle Electrical Contractor
Showing posts with label Generator install. Show all posts
Showing posts with label Generator install. Show all posts
Wednesday, June 1, 2016
Saturday, May 28, 2016
Seattle Electrician adding outlets.
At Seatown Electric we handle all aspects of home wiring. We specialize in Whole Home Rewiring, The Seattle area is filled with Knob and Tube wiring. Our goal is to eliminate as much as possible. Seattle Electricians must be well trained in Knob and Tube wiring since there is so much of it in Seattle. A small job like adding aditional outlets might require Knob and Tube rewiring.
Our electrical codes have changed drastically in 2008-2016. If we add outlets, or even replace outlets we are required to install some sort of AFCI protection. AFCI protection stands for Arc Fault Circuit Interupter. This device is designed to protect the home from low current arcing. You can either install AFCI protection at the panel box, or replace the device (outlet) with an AFCI protected outlet, they look similar to GFCI outlets.
Since AFCI protection is required and they are designed to find faults they tend to find faults when they are hooked up to Knob and Tube. This is why it sometimes makes sense to just get rid of the Knob and Tube.
Knob and Tube wiring is rumored to be "safe" if it has not been tampered with. I find this statement to be false. Knob and tube is designed for eary 1900 era equiptment. Take a step back into time and imagine what that looked like, a small table lamp or two, 1-2 outlets per room for small radios. This wiring was not designed for compact wall heaters, curling irons, 3-4 wall TV's per home, toaster, surround sound, computers etc... Not to mention all of that new age equiptment has no ground protection with Knob and Tube wiring.
If you have Knob and Tube it should be replaced, SeaTown Electric, you're Seattle Electricians can help replace this old wiring. (206)-293-0037
www.seatownelectric.com
Our electrical codes have changed drastically in 2008-2016. If we add outlets, or even replace outlets we are required to install some sort of AFCI protection. AFCI protection stands for Arc Fault Circuit Interupter. This device is designed to protect the home from low current arcing. You can either install AFCI protection at the panel box, or replace the device (outlet) with an AFCI protected outlet, they look similar to GFCI outlets.
Since AFCI protection is required and they are designed to find faults they tend to find faults when they are hooked up to Knob and Tube. This is why it sometimes makes sense to just get rid of the Knob and Tube.
Knob and Tube wiring is rumored to be "safe" if it has not been tampered with. I find this statement to be false. Knob and tube is designed for eary 1900 era equiptment. Take a step back into time and imagine what that looked like, a small table lamp or two, 1-2 outlets per room for small radios. This wiring was not designed for compact wall heaters, curling irons, 3-4 wall TV's per home, toaster, surround sound, computers etc... Not to mention all of that new age equiptment has no ground protection with Knob and Tube wiring.
If you have Knob and Tube it should be replaced, SeaTown Electric, you're Seattle Electricians can help replace this old wiring. (206)-293-0037
www.seatownelectric.com
Subscribe to:
Posts (Atom)